Furniture and woodwork
Production software for furniture and woodwork factories
Panels cut from sheet, a bill of materials per variant, finishing batches to keep straight, and board waste that decides the margin on the order. FleekERP holds the bill of materials for each product and variant, issues board and hardware by lot, records cutting, edge banding, finishing and assembly as operations, and shows what each sheet yielded.
Book a demoBook a demo for your plant
45 minutes, run on your own stages and quality checks.
What slows furniture factories down
- Board waste eats the marginSheets are cut order by order, and what each sheet actually yielded is never recorded.
- Variants make the BOM messyEvery size, finish and hardware option needs its own bill of materials, and spreadsheets can't keep up.
- Finishing batches get mixedPieces from different orders go through polish or paint together, and matching them back up takes time.
How it works
How your floor runs on FleekERP
- 1OrderSales order with the model, variant, finish, quantity and dateProduction control
- 2Cutting listPanels required across every open order, from the bill of materialsProduction planning
- 3MaterialBoard, laminate, hardware and adhesive issued by lotInventory and traceability
- 4Cutting and bandingPanels produced per sheet, with offcut and reject recordedShop floor apps
- 5FinishingFinish batch with its coats, drying time and the operatorQuality control
- 6Assembly and dispatchAssembly against the BOM, packing and delivery noteProduction control
Built for furniture factories
- One cutting list across ordersPanels from every open order are listed together, so sheets are cut for several orders at once instead of one order at a time.
- Yield per sheetPanels produced against sheets issued, with offcut recorded. Board waste is visible per job rather than at stock-take.
- Finish recorded as a batchCoats, drying time and the operator sit on the finishing operation, so a colour complaint traces back to the batch that made it.
Proof from other floors
Measured on real floors
None of our live customers are furniture factories yet. These factories are, and the same screens run your stages.
- Challenge
- OEM audit trails assembled from Excel, days per request
- Modules
- Production control, Traceability, Quality control
- Result
- Full lot trace in under 3 minutes. Excel traceability sheets gone.
- Challenge
- Planning took a full day; material over-consumption found after cutting
- Modules
- Production planning, Stock and BOM, Operator app
- Result
- Planning time down 60%. Over-consumption flagged while the roll is cut.
- Challenge
- Labour cost per order unknown; wages reconciled from bundle cards days later
- Modules
- Operator app, Production control, Cost per order
- Result
- Labour cost per order visible. Paper registers gone.
Cost and time
What it costs and how long it takes
- £4.50per employee login a month£22 per user login, annual termSee pricing →
- £3,700one-time setup, up to 100 loginsSetup and training at the stationHow setup works →
- 18 daysto your first production line liveOn scope agreed before you startWhat's included →
Questions from furniture factories
Do you optimise the nesting itself?
No. FleekERP produces the cutting list across open orders and records what each sheet yielded. The nesting geometry stays in your saw software.
Our products have size, finish and handle options. Can the BOM cope?
Yes. A product carries variants and the bill of materials differs by variant. The work order is raised against the variant that was ordered.
Next step
See FleekERP on your own production flow
Bring your routings and quality checks. We set them up before the call, so the demo shows your own stages.