Furniture Manufacturing ERP Made-to-order furniture, without the board waste.
Manage every size and finish variant, cut across orders in one batch, and track yield before waste eats into the margin.
- Variant BOMs
- Yield per sheet
- Finishing batches tracked
Book a 45-minute demo
Set up on your own production flow.
What slows furniture factories down
- Board waste eats the marginSheets are cut order by order, and what each sheet actually yielded is never recorded.
- Variants make the BOM messyEvery size, finish and hardware option needs its own bill of materials, and spreadsheets can't keep up.
- Finishing batches get mixedPieces from different orders go through polish or paint together, and matching them back up takes time.
How it works
How furniture factories run on FleekERP
Panels cut from sheet, a bill of materials per variant, finishing batches to keep straight, and board waste that decides the margin on the order. FleekERP holds the bill of materials for each product and variant, issues board and hardware by lot, records cutting, edge banding, finishing and assembly as operations, and shows what each sheet yielded.
- Variant BOM
- Cutting
- Material waste
- Production
- Finishing
- Dispatch
- 1OrderSales order with the model, variant, finish, quantity and dateProduction control
- 2Cutting listPanels required across every open order, from the bill of materialsProduction planning
- 3MaterialBoard, laminate, hardware and adhesive issued by lotInventory and traceability
- 4Cutting and bandingPanels produced per sheet, with offcut and reject recordedShop floor apps
- 5FinishingFinish batch with its coats, drying time and the operatorQuality control
- 6Assembly and dispatchAssembly against the BOM, packing and delivery noteProduction control
Built for furniture factories
- One cutting list across ordersPanels from every open order are listed together, so sheets are cut for several orders at once instead of one order at a time.
- Yield per sheetPanels produced against sheets issued, with offcut recorded. Board waste is visible per job rather than at stock-take.
- Finish recorded as a batchCoats, drying time and the operator sit on the finishing operation, so a colour complaint traces back to the batch that made it.
None of our live customers are furniture factories yet. See the factories that are, and what they report.
Related to furniture factories
Questions from furniture factories
What is furniture manufacturing ERP?
Made-to-order and custom furniture makers need it because each model comes in variants of size, finish and hardware, and board waste decides the margin. It holds a bill of materials per variant, combines panels from open orders into cutting lists, records what each sheet yielded, and follows finishing batches through assembly to dispatch.
Do you optimise the nesting itself?
No. FleekERP produces the cutting list across open orders and records what each sheet yielded. The nesting geometry stays in your saw software.
Our products have size, finish and handle options. Can the BOM cope?
Yes. A product carries variants and the bill of materials differs by variant. The work order is raised against the variant that was ordered.
How does FleekERP help reduce board waste?
It lists the panels needed across every open order in one cutting list, so sheets are cut for several orders at once, and records panels produced and offcut per sheet. Board waste then shows per job, not at stock-take.
Can a finish or colour complaint be traced back?
Yes. The finish is recorded as a batch on the finishing operation, with its coats, drying time and operator, so a complaint traces back to the batch that made it.
Next step
See your variant BOM to dispatch flow on FleekERP
Start with the problem you know best: board waste eats the margin. We set up your stages before the call, so the demo runs on your floor.